#RES2DINV MANUAL MANUAL#
#RES2DINV MANUAL FULL#
#RES2DINV MANUAL PC#

#RES2DINV MANUAL FULL#

Full and half depth range (vertical and horizontal orientation of dipoles).

Temperature stability: better than 0.1 mS/m /☌ (at slow temp.

In-phase ratio: ± 80 ppt, resolution 10 ppm.

Apparent conductivity: 1000 mS/m, resolution 0.1 mS/m.

In-phase ratio in ppt (magnetic susceptibility).

Weight: 0.7 kg (with Li-Ion battery pack).

Operating temperature: -10 ☌ to +50 ☌.

Internal exchangeable battery holder for 6 x AA single-use or rechargeable NiCd or NiMh batteries.

Working time: 3 - 4 working days (24 - 32 hours of continuous measurement).

Internal exchangeable rechargeable Li-Ion battery pack (integrated fully automatic intelligent battery charger).

Graphical LCD display 320 x 240, white backlight.

Factory and user calibrations (calibrating data are stored in the probe).

Easy USB data transfer or direct saving on USB flash disk.

Longitude, latitude and altitude are shown and saved automatically.

Integrated Bluetooth wireless technology.

Map preview of measured area (up to 15000 positions).

On-the-fly data transmission to external device (PC or other) via RS232.

Search mode – data are measured continuously but are not saved.

The position is localized by GPS receiver.

GPS Continuous measurement – data are measured and saved continuously in chosen measuring period.

The position is measured by GPS receiver.

#RES2DINV MANUAL MANUAL#

GPS Manual measurement – the user starts measurement at each point by pressing the key or by button.The positions on the profile are determined by length marks with consequent recalculation of positions of individual readings. Continuous measurement – data are measured and saved continuously in chosen measuring period.Each point can be re-measured or skipped and completed with a comment. The point position is updated automatically in the preset grid or can be entered directly.

Manual measurement – the user starts measurement at each point by pressing the key or by buttons.

Attachable CMD control unit works with all types of probes.

#RES2DINV MANUAL PC#

Cable for data download to PC and Flash Disk.Geological and civil engineering survey, agriculture and forestry, environmental monitoring, groundwater protection, raw material prospecting, archaeology, metal objects and utilities network detection. compatibility with inversion and mapping SW (IX1D, Res2DInv/Res3DInv, Surfer).easy data transfer to PC using USB cable connection or USB memory stick.good visibility of the graphic display under all conditions RES2DINV Manual, IRIS Instru-ments, com Miller SLM, Stewart RR (1991) The relationship between elastic-wave velocities and density in.high resistance against electromagnetic noise.minimum need of settings and calibration checking.two manual and two continuous measuring modes with GPS or length mark positioning.Single or multi depth probes designed for 0.5 - 6.7 m depth range allow single or multi layer mapping in traditional or GPS modes including vehicle applications. The CMD represents a large family of contactless geophysical instruments for fast assessment of ground conductivity and inphase (susceptibility).

Res2dinv manual